12 Gauge shotgun shell de-capper crimp cutter

Description

Using this tool you can cut open 12 Gauge birdshot shells quick and easy for reloading with wax slugs.
Blade is replaceable with a standard box cutter blade.
This tool removes the entire crimp including the roll portion
Tool is shipped assembled
Included in
Package:
1x 12 Ga Cutter Tool Main Body
1x 12 Ga Cutter Tool Blade Holder
1x 12 Ga Cutter Tool Thin Half
1x Box Cutter Blade
2x 12 x 1-1/4 sheet metal screws
6x Small Countersunk Screws
1X Hinge
NO SHOTGUN SHELLS ARE INCLUDED IN PACKADGE
Tool Use Instructions
1.Insert 12-gauge shell into thin half of the tool
2.Close the blade half onto the shell
3.Firmly hold both halves of the tool together and while pressing the shell into the tool slowly turn the shell back and forth making the cut larger with each oscillation. This should be done until a full rotation is completed.
4.Slowly remove the fully cut shell from the tool and dump the shot into a container
Tool Blade Replacement Instructions
1. Remove two screws from the body of the tool and separate the blade holder from the main body
2. Remove blade from main body
3. Place blade back into the slot on the main body
4. Put the blade holder back on the main body and tighten the screws until snug