(2) pc Sub-Miniature SPDT (Single Pole, Double Throw) Magnetic Reed Switches

Description

(2) Sub-Miniature SPDT Magnetic Reed Switches
0430
Most purchases qualify for a **
Combined Shipping Discount
**
Fast eMail
Fast Shipping
Guaranteed Good-on-Arrival
(2)
Sub-Miniature SPDT Magnetic Reed Switches
Normally
OPEN
and
Normally
CLOSED
Contacts
The common lead toggles between two contacts: Normally Open (N.O.) and Normally Closed (N.C., longer lead).
Body: 1/2" L x 3/32" D, Leads: 11/16"
Voltage Switching: 30 VDC
max
Current Switching: 180 mA
max
(resistive)
Carrying Capacity: 250 mA
max
Not recommended for
inductive
loads
such as transformers or motors.
(Note: Price is for (2) switches only. Magnets and pennies are NOT included.)
An ordinary refrigerator magnet like the one shown to the right (magnet NOT included) will actuate these switches at approximately 1/2". Stronger magnets will work at greater distances. Orientation is important. The axis of the magnet and switch should be parallel.
Caution: Glass is FRAGILE. (
Duh!
)
My best advice is to never bend the leads at all. The picture above to the right shows an example of my preferred method. Cut the leads to about ¼". Please do this ONE LEAD AT A TIME to avoid the 'wishbone effect' on the NO/NC pair. Carefully solder your hook-up wire to the outside surface. Not quite mil-standard, but a good solder joint will be plenty strong.
Note: We only sell switches with the original wire leads intact. They are NOT modified with hook-up wire leads. The picture is for illustration purposes only. The wire is not included.
But if you insist on bending the leads, grasp lead with a pair of needle nose pliers at least ¼" from the glass bulb and bend the end of the lead as you see fit. NEVER STRESS THE LEAD/GLASS SEAL. We do not replace switches damaged through improper handling.
SRDS-2
*************************************
ham radio etronic e-tronic hamtronic qba BootsParts USA boots
PAYMENT and SHIPPING
**
We offer a
Combined Shipping Discount
for most purchases (excluding books)
if paid with
ONE SINGLE PAYMENT
with eBay's
SHOPPING CART
**
Condition of Goods
Unless otherwise noted above:
NOS (New Old Stock) or better, clean, unused
30 day Non-DOA, Good-on-Arrival Guarantee
Untested, but NO JUNK or suspect parts
PCB parts are thru-hole, NO SMD/SMT
Small parts may be bulk packed
Manufacturers and Date Codes may vary
Attention
International
bidders only:
Sorry, we ship to
US ZIP Codes ONLY
.
We
DO NOT ship Internationally
.
We
ONLY
ship to
Registered US PayPal addresses
.
We
DO NOT accept INTERNATIONAL PayPal payments
.
IMPORTANT: The parts we sell are categorized as new because they are unused, but many of our parts are those rare, hard-to-find, discontinued, manufacturing surplus and
/
or old stock commonly known in the parts business as 'NOS' (New Old Stock). Some of our stock pictures show date codes which may vary from the actual product shipped.
Parts from a larger OEM package may be repacked for smaller lot size orders or for more practical handling and shipping.
We strive to give full and accurate descriptions to earn your 5-Star Feedback. Any known deficiencies are listed in the detailed description. Datasheets are provided when available. Some datasheets may be close but not a perfect match because of part revisions or because they may be from a different manufacturer. If you have any questions concerning our products please email us before purchasing. Your complete satisfaction is important to us before and after the sale. Thank you.