Hand Pump High Pressure 4500psi 3 Stage Gas Pump for PCP Air Gun Boat Tire Ball

Description

Product Description
➪ HIGH PRESSURE WITH SAFETY
, high pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7" flexible micro-bore hose can bear up to 63MPA pressure, safeguarding your safety with superior quality.
➪ DURABLE WITH SMOOTH MOTION
, sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear.
➪ USER-FRIENDLY DESIGNS
: Comes with oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters.
➪ COMPACT & FOLDABLE FOR EASY STORAGE
, 5mm foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use.
➪ VISIBLE PRESSURE GAUGE
: Precisely shows the pressure with no air leaking, you can know when to stop inflating.
➪ OIL-WATER SEPARATOR
: Use top-grade material, anti-crack, low temperature is not easy to crisp. (Non-ruptured at -30℃)
➪ PRESSURE RELIEF SCREW
: Tighten the pressure relief screw before inflating air (clockwise). Loosen the pressure relief screw to release the air after inflation completed. (Counterclockwise)
Before Using:
Make sure the tightness before using it. Make sure the high tightness between the connector and the air tank to avoid leaking. (Refer to the manual)
Inflating steps:
1. Connect the high-pressure pump to the scuba tank.
2. Close the pressure relief valve.
3. Start to inflate and stop inflating when the air pressure reaches to 3000 psi or 200 bar.
4. Open the pressure relief valve to relieve pressure.
5. Pull out the scuba tank, and the inflation is completed.
Specification:
Material: Stainless Steel
Net weight: about 2.5KG/5.51 Pounds
Measuring Range: 0-40MPA
Dimension:
Total length: approx. 61.5cm/24.21 inch
Handle length: approx. 25.6cm/10.08 inch
Hose length: approx. 62cm/24.41 inch
Air tube range: approx. 53cm/20.87 inch
Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch
Package includes:
1x Hand Pump
1x Manual
1 Set of Accessories
Note
: We highly recommend inflating your air tank by air compressor machine, the air pump just for emergency use.
Before Using:
Make sure the tightness before using it. Make sure the high tightness between the connector and the air tank to avoid leaking. (Refer to the manual)
Inflating steps:
1. Connect the high-pressure pump to the scuba tank.
2. Close the pressure relief valve.
3. Start to inflate and stop inflating when the air pressure reaches to 3000 psi or 200 bar.
4. Open the pressure relief valve to relieve pressure.
5. Pull out the scuba tank, and the inflation is completed.
Specification:
Material: Stainless Steel
Net weight: about 2.5KG/5.51 Pounds
Measuring Range: 0-40MPA
Dimension:
Total length: approx. 61.5cm/24.21 inch
Handle length: approx. 25.6cm/10.08 inch
Hose length: approx. 62cm/24.41 inch
Air tube range: approx. 53cm/20.87 inch
Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch
Package includes:
1x Hand Pump
1x Manual
1 Set of Accessories
Note
: We highly recommend inflating your air tank by air compressor machine, the air pump just for emergency use.
powered by