L. E. Wilson Trimmer SS w/ SS Micrometer Adjustment Steel Cutter (CTSS-MIC)

Description

Stainless Case Trimmer with Micrometer Adjustment
New Stainless long lasting finish with Micrometer adjustment
Larger stop screw adjustment from 3/8" (old)  to 1/2" (new) with increased width on Stop Nut.  Makes for a firm stop. Coated with black oxide for a long lasting durable finish.
Major adjustment in the Stop Screw and fine adjustment by increments of .001 with the Micrometer
NEW 304 Stainless Steel Handle included with Micrometer Trimmer
Steel Cutter
Made in the U.S.A. with American Steel
Power Adapter compatible
Case Holders are extra, one in picture shown for reference only not included with trimmer.
For reference:
The case holder holds the case for trimming, primer pocket reaming, neck reaming and deburring with our Uniform Deburring Tool.
Depending on the caliber we may only need to make one Case Holder.  But in some calibers we have to make a seperate case holder sized and non-sized brass.  So if you are full length sizing 308 Win Brass you will need a NEW Case Holder.  But if you are neck sizing only 308 Win Brass, this does not change body diameters, so you will need a FIRED Case Holder.
On the other hand for the 223 Rem we only make one case holder.  That is what we now call a STANDARD Holder.  This will work for full length, neck sized or new brass.
Fired Case Holders
= Neck Sized only or if you are forming wildcat calibers and want to trim non-full length sized brass
New Case Holders
=
Full length sized cases or New factory brass
Standard Case Holders
=
These will work for all cases New or Fired
The handling charge is for package insurance.