Lee 223 Case length Gauge - Cutter & Lock Stud - Chamfer and Deburring Tool

Description

YOU GET ALL 3!!!!!!!!!!!!!!!!
EVERYTHING NEW IN STOCK READY TO SHIP - BUY ALL AT ONE PLACE AND GET IT FAST - OUT OF STOCK MOST PLACES - DONT PAY 3 DIFFERENT SHIPPING CHARGES - EVERYTHING HERE SHIPS FREE!!!!!!
CASE LENGTH GAUGE
The
Lee
Case Length Gage
is a precise and easy way to trim brass cases to length and square the case mouth. Requires a Lee Cutter and Lock Stud to function.
The first step to successfully trimming brass cases with the Lee Case Length Gage and Shellholder is to take the Lee Lock Stud (sold separately) and screw it into the shell holder. Next the Length Gage needs to be screwed into the Case Trimmer Cutter (sold separately). The length gage is set to cut each case within
SAAMI
specifications. After the tools are screwed together the next step is case trimming. Just put the empty brass into the shellholder, insert the case length gage into the empty piece of brass and turn the cutter until the piece of brass is trimmed to the predetermined length. It is that easy to get consistent case lengths and square case mouths helping to keep reloaded ammunition as accurate as possible.
CUTTER AND LOCK STUD
The
Lee
Case Trimmer and Cutter
is designed to be used with only Lee Case Length Gages and Shellholders (sold separately). This handy tool is made from hardened steel, trimming cases to correct
SAMMI
specifications has never been easier. The shaft on the lock stud allows the setup to be turned by hand or with an electric drill.
Technical Information
Fits:
Lee Case Length Gages and Shellholders
Function:
Lock Stud holds the shellholder, Trimmer Cutter holds the Length gage
Material:
Steel
Notes:
Trim length cannot be adjusted as with bench-mounted case trimmers
Large Cutter and Lock Stud has 1/4" shaft for fitting in a drill and the regular Cutter and Lock Stud has a 3/8" shaft for fitting in a drill
LEE CHAMFER AND DEBURRING TOOL
The
Lee
Chamfer and Deburring Tool
is an ideal too to use after trimming cases to remove the burrs that are created which must be removed prior to loading.
Made of hardened steel
the unique design cuts fast without chatter. One turn does the job. Chamfers and deburrs inside and outside necks of cases. Can also be used to remove the crimp from primer pockets of military crimped brass.
Technical Information
Function:
Chamfer and Deburr Brass
Material:
Hardened Steel
Notes:
Can also be used to remove the primer crimp commonly found on military crimped brass
Here at M&M SALES we value our
100% customer feedback
. If for whatever reason you are not satisfied with your order send us a message and we promise to make your problem, our problem. We strive to give the best customer support out there and appreciate each and every one of our customers. Thanks for your business and we look forward to it in the future!
Visit or EBAY store to view all of our other listings! More items being added daily!