Mini QCWDRSSTC Quasi-Continuous Wave Tesla Coil Sword Arc Control Box

Description

Mini QCWDRSSTC Quasi-Continuous Wave Tesla Coil Sword Arc Control Box
Description
Description:
This is a mini QCWDRSSTC controller, which is suitable for quasi-continuous wave Tesla coils for DC bus power adjustment.
Both the modulation signal and the operation signal are transmitted through optical fiber, and the modulation signal is sent to the BUCK driver. This BUCK driver is actually a gate driver, which uses an open loop method to control the BUCK to generate the bus sawtooth voltage. We have also made this gate driver into a module that has been put on the shelf, and can be used with this set of controllers. See the link below
Due to he fact that QCWDRSSTC production materials and tutorials on the Internet are not popularized and perfected, enthusiasts are more difficult to do without suitable reference objects and suitable accessories parameters. For this reason, the shop will also plan to produce a complete set of QCWDRSSTC tutorials, so that everyone can easily debug Make your own sword-shaped arc maker!
The technical parameters of this controller are as follows:
The minimum frequency value is about: 1.5HZ, the minimum value is about: 4HZ
Maximum pulse width value: 17MS, minimum value: 10MS
(The pulse width and frequency adjustment knobs are rotated counterclockwise to increase)
Modulation output fiber interface model: HFBR1521 (connected to BUCK grid drive)
Operation output fiber interface model: HFBR1414 (connected to DRSSTC drive)
Controller power input voltage: DC24V
Controller power input interface model: standard internal positive and external negative DC2.1
The controller defaults to the internal sawtooth wave static voltage setting of 1.1V (using the BUCK module and gate drive test provided by our shop, the final BUCK bus static voltage is about 50V)
Since the delay time from the controller signal to the BUCK gate drive is relatively long, if our gate driver is used, the delay time is about 1MS. In order to synchronize the synchronization of the DR driver and the bus voltage, our controller will default to the internal debugging operation signal lagging behind the sawtooth signal about 1MS time output! Please pay attention to this!
Package ：
1x control box
1*power adapter
1*Connecting line
1. Fiber optic cable
Shipping
Item will be shipped within 24 -48 hours after full payment is received.
Normally the shippment to worldwide is used to take 15 to 30 business days, exclude Sat & Sun.
Payment
We accept PayPal only.
Payment must be received in 7 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in ebay note when you pay the order.
Any special request cannot be accepted after 24 hours of payment,because most of orders will be processed instantly and same day dispatched.
Contact Us
If you have any questions, please feel free to email our servicer ，and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven't received item in 45 days, please contact us and we will arrange refund or resend
Feedback
We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply your email as soon as possible, please kindly allow 24 hours(working day) for us to response. Thank you.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact.