USB6M - 300 Second USB Recording Module WITH LIGHT SENSOR (Windows 10)

Description

NOW WINDOWS 10 COMPATIBLE! (
Needs BOTH the newly redesigned hardware and new software to operate under Windows 10)
This module plugs directly into the USB port of your PC. Then use the free software to record up to 300 seconds of .wav files to this module over 5 segments. Comes with a speaker and a line out for an additional amplifier or external speakers.
Playback can be triggered by any of the following: pressing one of 4 push buttons; motion picked up by the PIR sensor, and/or change in light level via the Photocell light sensor.
Features:
300 seconds of re-recordable voice message over 5 segments. (4.7K sample rate)
Supports up to 4 switches and 2 sensors simultaneously
40mm metal housing mylar speaker
3.5mm (1/8") mono-audio output
Supports multi-section sound
1 x PIR with the connector included
Use USB type-A male connector for direct plug into the USB port of PC. (USB1.1)
Ideal for transferring custom messages for different applications.
Adjustable sensitivity for PIR sensor
PIR Range: 9 - 13 feet.
Record sound files from PC with provided software
Please click the picture and see next page for software operation/download
Dimensions:
Mainboard - Excluding USB connector: 65mm x 35mm
- Including USB
connector
& slide switch : 86mm x 35mm
Speaker:  40mm (diameter)
System Requirements:
Unused USB port on a computer
Windows 10 or earlier
3 x AAA Batteries (Not included)
This unit will directly plug into the USB port of your computer. A USB cable is NOT required. However, if you do want to plug the unit into an extension USB cable first, you can order our A-male to A-female USB extension cable
Additional Details:
After you have added your sound files in the PM66Q program make sure to save your settings first by clicking on the "Save file" button, and THEN click the "PM66" button to program your module. (this is different from the previous version hardware where you could program the module directly without saving the configuration file first"
NOTE:
When using the software for the USB6M, be sure to select "DAC for Ext.AMP" under the Voice Output tab before you program the board. Failing to do so, will make the sound distorted during playback on the module.
Specifications:
IC Function: 300 seconds of re-recordable IC, USB controller
Operation Current: 120mA
Playtime: 200 times (with alkaline batteries)
Standby Current: 200uA (with motion sensor or PIR sensor)
Input / Switch: Push switch (play / stop)
LED: LED playing indicator
Speaker: 40mm metal housing mylar speaker
Battery Type: External AAAx3 battery holder
Dimensions:
34mm x 64mm x 8mm (connector height)